Sensor Plate (Outlet) - Oki OKIPAGE 10e Service Manual

Page: 43
Service Guide OKIPAGE 10e
Chapter 3 Disassembly

3.3.18 Sensor Plate (Outlet)

(1) Remove the upper cover (see 3.3.1).
(2) Remove the operator panel assy (see 3.3.4).
(3) Remove the eject roller assy (see 3.3.9).
(4) Remove the face up stacker assy (see 3.3.8).
(5) Remove the lower base unit (see 3.3.5).
(6) Remove the fusing unit assy (see 3.3.15).
(7) Press the clamps of the sensor plate (outlet) (1), and remove the sensor plate by pushing it up.