Page: 30
Service Guide OKIPAGE 10e
Chapter 3 Disassembly
3.3.5 Lower Base Unit
(1) Remove the upper cover (see 3.3.1).
(2) Remove the operator panel assy (see 3.3.4).
(3) Remove the face up stacker assy (see 3.3.8)
(4) Remove the connecting cables (2) and (3) of the pulse motors from the connectors (DM, RM) of the M5G-PCB (1).
(5) Remove the LED head cables (4) from the connectors (HEAD1).
(6) Open the manual feed guide assy, remove six screws (7), then remove the lower base unit (6).