Operator Panel Assy - Oki OKIPAGE 10e Service Manual

Page: 29
Service Guide OKIPAGE 10e
Chapter 3 Disassembly

3.3.4 Operator Panel Assy

(1) Unlock two latches on the upper cover from the rear side, lift the operator panel assy (1) from the back and remove
it.
(2) Remove the Sumi card (operator panel) (2) from the connector (CN1) (3).
Note: You can remove the operator panel assy while the upper cover installed on the unit. However, it is much easier to
remove the panel assy after removal of upper cover.