Access To Servers Parameters - Xerox WorkCentre 222 User Manual

Enter connection
Enter connection
Enter Email
Enter Email
Enter
E-MAIL ADR

Access to servers parameters

Enter
SMTP
Enter
POP3
Enter
DNS 1
Enter
DNS 2
Access to the authentification SMTP parameters
In the ACTIVATION menu, select WITH to activate SMTP authentification then validate with OK
key.
In the PARAMETERS menu, select ID.MESS.SERV to keep the same identification parameters as
in the messaging service or AUTHENT. SPEC. to define other identification parameters, then
validate with Access to SMTP authentification parameters by pressing OK key. When you select
AUTHENT. SPEC, carry out the two following operations.
Enter the IDENTIFIER then validate with OK key.
Enter the PASSWORD then validate with OK key.
1. If the identifier has more than 16 characters, the text will automatically slide over to the left.
1
, press OK.
IDENTIFIER
, press OK.
PASSWORD
922 OK - INTERNET / INIT. PROVIDER / MESS. SERV
, press OK.
IDENTIFIER
, press OK.
PASSWORD
, press OK.
, press OK.
, press OK.
(primary), press OK.
(secondary), press OK.
924 OK - INTERNET / INIT. PROVIDER / SMTPAUTHENT.
4-14
923 OK - INTERNET / INIT. PROVIDER / SERVERS
Setting your machine