Other Functions; Logs - Xerox WorkCentre 222 User Manual

Operation
If you want to offset the side margins of your document to the left or to the right.
Adjust the offset of the left/right margins (in 0.5mm steps) using keys
Validate by pressing the OK key.
If you want to offset the side margins of your document to the high or to the low.
Adjust the offset of the high/low margins (in 0.5mm steps) using keys
Validate by pressing the OK key.
O
THER FUNCTIONS
The incoming and outgoing logs list the last 30 transmissions (incoming and outgoing) made by
your machine.
An automatic print out will take place after every 30 transmissions. However, you may request a
print out at any time.
Each log (incoming or outgoing) contains a table with the following information:
• date and time of the incoming or outgoing document
• subscriber's number or E-mail address
• transmission mode (Norm, Fine, SFine or Photo)
• number of pages sent or received
• call duration
• incoming or outgoing results: noted
or
information codes for special calls (polling, manual subscribers, etc.)
• reason for call error (example: your subscriber does not answer)
To print the logs:
The incoming and outgoing logs are printed on the same page.
856 OK - ADVANCED FCT / SCAN. & PRINT / PRINTER MARG
857 OK - ADVANCED FCT / SCAN. & PRINT / PRINTER MARG
L
OGS
CORRECT
6-17
and
and
if properly transmitted
52 OK - PRINT / LOGS
.
.