Applying Translation Rules To The Inbound Voip Calls; Applying Translation Rules To The Outbound Calls - AddPac PassFinder AP2520 User Manual

PassFinder AP2520 VoIP Router/Gateway Operation Manual
5.3.7.3.

Applying Translation Rules to the Inbound VoIP Calls

To apply the translation rule set to all calls received from the network, make
following setting.
Step
1 Router# configure
2 Router(config)# voice service VoIP
3 Router(vservice-VoIP)#
translate-VoIP-incoming {called-number |
calling-number}
5.3.7.4.

Applying Translation Rules to the Outbound Calls

To apply the translation rule set to the outbound calls going to a certain dial
peer (POTS peer or VoIP peer) make following setting.
Step
1 Router# configure
2 Router(config)# dial-peer voice
VoIP }
3 Router(dial-peer-config)# translate-outgoing
{called-number | calling-number}
AddPac Technology Co., Ltd.
Command
tag
Command
tag
{ pots |
tag
Version 1.10 / Mar. 2002
Description
Enters into the global configuration
mode.
Enters into the voice service VoIP
setup mode.
called-number:
translation rule to the inbound called
party.
calling-number:
translation rule to the inbound calling
party number.
The tag refers to the rule set and tag
values range from 0 to 65535.
Description
Enters into the global configuration
mode.
Enters into the dial-peer configuration
mode.
The tag is the only identifier of the
dial-peer of this system, and tag
values include 0 ~ 65535.
called-number:
translation rule to
called party number.
calling-number:
translation rule to
calling party number.
The tag refers to the rule set and tag
values range from 0 to 65535.
Applies the
Applies the
Applies the
the outbound
Applies the
the outbound
197
- -