Turning on
1
Set the required heating mode using the function
selector. The chosen heating mode and the
default temperature are displayed.
2
If you want to change the default temperature:
set the required temperature with the rotary
selector.
"
The preheating symbol
The bar continuously shows the preheating status.
When the set temperature is reached, a signal sounds
and the preheating symbol
Note: The oven interior lighting stays switched off at a
temperature setting below 160° F (70°C).
Switching off:
Turn the function selector to
Quick heat
Your appliance reaches the required temperature
particularly fast with the "Quick heat" function.
So you achieve a uniform cooking result, do not place
your meal in the oven interior until "Quick heat" has
ended.
You must activate the "Quick heat" function in the
factory setting (see section entitled Factory setting).
Safety lock
For your protection, the appliance has a safety shut-off
feature. Every heating operation is switched off after
12 hours if the appliance is not operated during this
time. A message appears in the display.
Exception:
programming with the long-term timer.
Turn the program selection to
operate the appliance in the manner to which you are
accustomed.
appears on the display.
"
goes off.
0
.
, after which you can
0
Timer functions
In the timer menu, set:
Š
Timer
p
Stopwatch
6
Cooking time (not in the idle state)
5
Cooking time end (not in the idle state)
Launching the timer menu
You can launch the timer menu from any mode. Only
from the factory settings, program selection is set to
S
, the time menu is not available.
M
Touch the
symbol.
The timer menu appears.
Timer
The timer runs independently of the other appliance
functions. You can enter a maximum of 90 minutes.
Setting the timer
1
Call up the Timer menu.
The "Timer" function
2
Turn the rotary selector to set the desired time.
I
3
Start with
.
Š
is displayed.
17