Table of Contents
Advertisement
Maintenance
This chapter explains how to restore the Network Camera to factory default, upgrade firmware
version, etc.
Reboot
This feature allows you to turn off and then turn on the Network
Camera.
It takes about one ~
two minutes to complete the
process.
When completed, the live video will be displayed in your
browser. The following message is displayed during the rebooting process.
If the connection fails after rebooting, manually enter the IP address of the Network Camera in
the address field to resume the connection.
Restore
This feature allows you to restore the Network Camera to factory
default.
Two settings can be
excluded:
Advertisement
Table of Contents
