Table of Contents
Advertisement
Network Camera User's Manual
Maintenance
1. "Reboot system"
while the Network Camera got problem.
2. "Restore system"
the factory default settings. Restore all settings to factory default except settings in
"Network type " and "Root Password". The system will restart and require the installer
program to set up the network again.
3. "Calibrate"
Recalibrate the home position to the default center to recover the
tolerance cased by some external forces. Please note that there is no confirming
message box after clicking on the "Calibrate" button, the Network Camera will calibrate
immediately.
4. "Export/Import file"
--
Export setting backup file: Click to export all parameters for the device and
user-defined scripts.
Upload setting backup file: Click Browse... to upload a setting backup file. Please note
--
that the model and firmware version of the device should be the same as the setting
backup file. If you have set up a fixed IP or other special settings for your device, it is not
The "Reboot" button will reboot the Network Camera. It's useful
Click on "Restore" button on the configuration page to restore
52/61
Advertisement
Table of Contents
