Table of Contents
Advertisement
To start plotting an event, it is suggested to configure server and media columns first so that
the Network Camera will know what action shall be performed when a trigger is activated.
Media Settings
In Media Settings column, click Add to open the media setting
specify what kind of media to send when a trigger is activated. A total of five media settings
can be configured.
Media name: Enter a descriptive name for the media setting.
Media Type: There are three choices of media types available: Snapshot, Video Clip, and
System log.
Snapshot: Select to send snapshots when a trigger is activated.
■ Source: Select to take snapshots from stream 1 or stream 2.
■ Send pre-event images
The Network Camera has a buffer area; it temporarily holds data up to a certain
to capture how many images before a trigger is activated. Up to seven images can be
generated.
■ Send post-event images
Specify to capture how many images after a trigger is
generated.
For example, if both the Send pre-event images and Send post-event images are
set to seven, a total of fifteen images are generated after a trigger is activated.
page.
In this page, you can
activated.
Up to seven images can be
limit.
Specify
Advertisement
Table of Contents
