Table of Contents
Advertisement
Upgrade
When you select one device or multiple devices (of the same model), the
"Firmware Upgrade" button will be enabled. Click on it to upgrade the
firmware of the selected device(s). After click on the "Firmware Upgrade"
button, Installation Wizard will try to connect the selected device(s) and lead
you to the firmware upgrade page.
Device Information
After connected to the selected device(s), it would display as below. If you select more than
one device, then the device information will show all the selected devices. You can switch to
the server info by click on the tab control.
Click on the "Firmware Upgrade"
Advertisement
Table of Contents
