Table of Contents
Advertisement
Network deployment
Setup the Network Camera over the Internet
This section explains how to configure the Network Camera to Internet
connection.
1. If you have external devices such as sensors and alarms, make connection
from general I/O terminal block.
2. Use the supplied RJ45 female/female coupler to connect the Network
Camera to a switch. Use Catagory 5 Cross Cable when Network Camera is
directly connected to PC.
3. Connect the power cable from the Network Camera to a power outlet (AC
24V 2A).
There are several ways to setup the Network Camera over the
first way is to setup the Network Camera behind a
to utilize a static
IP.
The third way is to use
router.
The second way is
PPPoE.
Internet.
The
Advertisement
Table of Contents
