Table of Contents
Advertisement
Network Type: Select this option to retain the Network Type settings (please refer to Network
Type section).
Daylight Saving Time: Select this option to retain the Daylight Saving Time settings (please
refer to System section)
If none of the options is selected, all settings will be restored to factory default.
The following message is displayed during the restoring process.
Calibrate
This feature re-calibrate the home position to the default center to recover the tolerance
caused by some external forces. Please note that there is no confirming message box after
clicking on Calibrate, the Network Camera will calibrate immediately.
Upload / Export Daylight Saving Time Configuration File
This feature allows you to set the starting time and ending time of DST.
Follow the steps below to set up:
1. In the Export Daylight Saving Time Configuration File Column, click Export to export an
Extensible Markup Language (*.xml) file from the Network Camera.
2. Open the XML file using Microsoft® Notepad and locate your time zone; set the starting time
and ending time of the DST. When completed, save the file.
Advertisement
Table of Contents
