Table of Contents
Advertisement
the PPPoE setting page. In this page, you can input the "PPPoE
username" and "PPPoE password" provided by your ISP, and then the
server will be set to PPPoE mode rather than LAN mode when the setup is
completed. If you don't know the account information, please contact your
ISP. After inputting the account information, please click on the "Next"
button to continue your next step.
LAN Setting
If you click on "No" in the "Network Type" dialog window, you will be led to
the Network setting page. In this page, you can change the server's IP
address, subnet mask, default gateway, primary DNS server, secondary
DNS and DHCP server. Please refer to the below page.
You could set up the network with DHCP or fixed IP:
1. DHCP: Check the "Get IP by DHCP Server automatically" will force
the device to renew its IP address whenever it reboots, and the related
network configuration is provided by the DHCP server.
2. Fixed IP: If you want the device to use a fixed IP, please uncheck the
Network Setting for LAN
Advertisement
Table of Contents
