Table of Contents
Advertisement
Follow the steps below to set up the remote log:
1. In the IP address text box, enter the IP address of the remote server.
2. In the port text box, enter the port number of the remote server.
3. When completed, select Enable remote log and click Save to take effect.
Current Log
This column displays the system's log in chronological
order.
The system log is stored in the
Network Camera's buffer area and will be overwritten when reaching a certain amount.
View parameters
The View parameters page lists the entire system's parameters in alphabetical
order.
If you
need technical assistance, please provide the information listed in this page.
Advertisement
Table of Contents
