System Log - LevelOne FCS-4010 User Manual

Source: Select the recording source (stream 1 or stream 2).
Recording Schedule: Specify the recording duration.
■ Select the days on weekly basis.
■ Select the time for recording in 24-hr time format.
Destination: Specify a storage destination for the recorded video files. Note that the destination
field is empty by default. Please go to Configuration > Application > Server Settings to set a
Network storage server; please refer to Server Settings section.
Max. recording capacity: Please note that when the maximum capacity is reached, the oldest
file will be overwritten by the latest one.
File size for each recording: Specify the file size for each recording media.
File name prefix: Enter the text that will be put in front of the file name.
When completed, select Enable this recording. Click Save to take effect and then click Close to
quit this page. The new recording name will appear in the recording drop-down list on the
recording page. To remove a recording setting from the list, select a recording name from the
drop-down list then and click Delete.

System log

This section explains how to configure the Network Camera to send system log to remote
server as a backup. It is composed of the following two columns: Remote Log and Current Log.
Remote Log
You can configure the Network Camera to send the system log file to a remote server as a log
backup. Before utilizing this feature, it is suggested to install a log-recording tool to receive
system log messages from the Network Camera. For example, a tool -- Kiwi Syslog Daemon.
Visit http://www.kiwisyslog.com/kiwi-syslog-daemon-overview/.