LevelOne FCS-4010 User Manual page 85

<length> is the actual length of content.
Example: request IP address and it's response
Request:
http://192.168.0.123/cgi-bin/admin/getparam.cgi?network_ipaddress
Response:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: 33\r\n
\r\n
network.ipaddress=192.168.0.123\r\n
Set server parameter values
Note: The access right depends on the URL directory.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/anonymous/setparam.cgi? <parameter>=<value>
[&<parameter>=<value>...][&update=<value>][&return=<return page>]
http://<servername>/cgi-bin/viewer/setparam.cgi? <parameter>=<value>
[&<parameter>=<value>...][&update=<value>] [&return=<return page>]
http://<servername>/cgi-bin/operator/setparam.cgi? <parameter>=<value>
[&<parameter>=<value>...][&update=<value>] [&return=<return page>]
http://<servername>/cgi-bin/admin/setparam.cgi? <parameter>=<value>
[&<parameter>=<value>...][&update=<value>] [&return=<return page>]
Parameter Value
<group>_<name> value to
assigned
update <boolean>
return <return
page>
Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: <length>\r\n
\r\n
<parameter pair>
where <parameter pair> is
Description
Assign <value> to the parameter <group>_<name>
Set to 1 to actually update all fields (no need to use update parameter in each
group)
Redirect to the page <return page> after the parameter is assigned. The
<return page> can be a full URL path or relative path according the current
path. If you omit this parameter, it will redirect to an empty page.
(note: The return page can be a general HTML file(.htm, .html) or a LevelOne
server script executable (.vspx) file. It can not be a CGI command. It can not
have any extra parameters. This parameter must be put at end of parameter
list)