Section 13: Installing The Spinner - Hangar 9 Solo Instruction Manual

Section 13: Installing the Spinner

Parts Needed
• Spinner
• Spinner back plate
• Spinner screws (2)
• Fuselage with motor mounted
1. Remove the propeller nut and prop washer from the engine.
Locate the spinner, spinner back plate and two screws.
2. Install the spinner back plate on the engine crankshaft. Place
the propeller on the crankshaft and position it so it seats
correctly against the spinner back plate. Next, install the engine
washer and the prop nut onto the crankshaft and tighten
securely.
Tools and Adhesives Needed
• Phillips screwdriver (medium)
3. Attach the spinner to the spinner back plate using the two
screws provided in the hardware bag.
37