Pre-Flight Check
Step 1. Check that all control functions move in the correct
direction. If not, use the respective reversing switch to correct
the direction.
ELEVATOR
AILERON
AILERON
THROTTLE
RUDDER
RUDDER
ELEVATOR
AILERON
CARBURETOR
1/16"
Note: Mode II transmitter shown in diagram.
Step 2. Check that each clevis is securely snapped into
position.
Step 3. Check that all servo horn screws are tight.
Step 4. Charge the transmitter and receiver battery per the
instructions included with your radio system.
Step 5. Read and follow all the instructions included with the
engine and follow the recommended break-in procedure.
53