Matrix A7xi Owner's Manual page 25

MANAGER MODE AND ENGINEERING MODE
3X AND 5X CONSOLES:
These sections allow users to manipulate default settings for the machines. It may be accessed by pressing the Level Up/
Level Down keys simultaneously for 5 seconds. To change a setting, press "Enter" on the keypad under 'Manager Mode'
or 'Engineering Mode' and use the incline or level buttons and numeric keypad to enter a category and change the values.
Pressing "Enter" again will save the change. Pressing "Back" or "Stop" will bring you to the previous menu. To exit Manager or
Engineering Mode, hold "Stop" down for 5 seconds. Below is a list of the settings that can be changed.
MANAGER MODE SETTINGS:
Default Time Software Version
Default Level Speed/Distance Mode
Default Incline (Ascent Trainer) Out of Order
Default Age Gender
Default Weight Sound Mode
Accumulated Distance Maximum Time
Accumulated Time Language
Incline Reset (Ascent Trainer)
7XE AND 7XI CONSOLES:
These sections allow users to manipulate default settings for the machines. Manager Mode may be accessed by pressing
ENTER, 1, 0, 0, 1, Enter on the keypad. Engineering Mode may be accessed by pressing ENTER, 2, 0, 0, 1, Enter on the
keypad. The screen shots on the next page show what you will see when you enter Manager Mode and Engineering Mode.
This console has a fully integrated touch screen display. Lightly touch the screen and use the intuitive interface to adjust
the settings. Any and all changes made will be saved when the "home" button is touched in the upper left-hand corner of
the screen. Touching the "home" button will exit manager or engineering mode and return you to the main screen. It is not
necessary to touch this button after each setting is changed.
48
MX14_AEALB3x_5x_7xe_7xi_OM_Rev1_1.indd 48-49
ENGINEERING MODE SETTINGS:
Disable Errors Club ID
Speed Units ErP Time
Machine Type Am System
Power Save Time Audio Source
Pause Time Volume control
Serial Number
Incline Tuner (Ascent
Trainer)
7XE - MANAGER AND ENGINEERING MODE 7XI - MANAGER AND ENGINEERING MODE
49
6/4/14 11:24 AM