How to use the control panels of schilling gym equipment: treadmill, ascent trainer (elliptical), upright & recumbent bike and rowing machine (8 pages)
IMPORTANT PRECAUTIONS SAVE THESE INSTRUCTIONS • When using an Ascent Trainer or Suspension Elliptical Trainer, basic precautions should always be followed, including the following: Read all instructions before using this equipment. It is the responsibility of the owner to ensure that all users of this equipment are adequately informed of all warnings and precautions. •...
Page 4
PCTVs should be used for each 20 A circuit. The power outlet should have All Matrix 3x, 5x, 7xe and 7xi 110 V Suspension Elliptical Trainers and Ascent Trainers the same configuration as the plug. No adapter should be used with this require the use of a 100-125 V, 60 Hz and a 15 A “Dedicated Circuit”, with a non-looped...
Page 5
DANGER! WARNING! • Improper connection of the equipment-grounding • Connect this exercise product to a properly grounded outlet only. conductor can result in a risk of electric shock. • Never operate product with a damaged cord or plug even if it is working properly. Never operate any product if it Check with a qualified electrician or serviceman appears damaged, or has been immersed in water.
Page 6
Red Hardware Bag Description Socket Head Bolt (M10x1.5P-25L) Flat Washer (Φ10.2xΦ20x2.0T) ASCENT TRAINER SUSPENSION ELLIPTICAL TRAINER...
Page 7
Pink Hardware Bag Green Hardware Bag Description Description Screw (M5x0.8Px16L) Socket Head Bolt (M10x1.5Px100L) Flat Washer (Φ10.2xΦ20x2.0T) Hex Nut (M10) Class 10 Yellow Hardware Bag Note: Use torque wrench and Description tighten to (70 N-m - 90 N-m) Screw (M5x0.8Px10L)
Page 8
Red Hardware Bag Description Socket Head Bolt (M10x1.5Px25L) Flat Washer (Φ10.2xΦ20x2.0T)
Page 9
Blue / Black Hardware Bags White Hardware Bag Description Description Screw (M5x0.8Px16L) Socket Head Bolt Spring Washer (Φ8.2xΦ15.4x2.0T) Spring Washer Socket Head Bolt (M8x1.25Px20L) Screw (ALB only) Screw (M5x0.8Px16L) Socket Head Bolt (M8x1.25Px45L) Screw (M5x0.8Px12L) ASCENT TRAINER SUSPENSION ELLIPTICAL TRAINER ASCENT LOWER BODY (ALB)
Page 10
Pink Hardware Bag Pink Hardware Bag Description Description Screw (M5x0.8Px16L) Screw (M5x0.8Px16L) Note: Be careful not to pinch any wires while tightening screw.
Page 11
Pink Hardware Bag Yellow Hardware Bag Description Description Screw (M5x0.8Px16L) Screw (M5x0.8Px16L) 5X, 7XE, 7XI ASSEMBLY COMPLETE!
BEFORE YOU BEGIN POWER LOCATION OF THE UNIT If the equipment is powered by a power supply, the power must be plugged into the power jack, which is located in the front of the equipment near the Place the equipment on a level and stable surface away from direct sunlight. stabilizer tube.
PROPER USAGE USING THE HEART RATE FUNCTION The heart rate function on this product is not a medical device. While heart rate grips This equipment offers a variety of can provide a relative estimation of your actual heart rate, they should not be relied foot positions.
5. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. MATRIX dealers will provide Check all connecting joint areas for tightness of bolt assemblies.
178 x 74.2 x 174 cm / 81” x 34” x 79” * Ensure a minimum clearance width of 0.6 meters (24”) for access to and passage around MATRIX equipment. Please note, 0.91 meters (36”) is the ADA recommended clearance width for...
Need help?
Do you have a question about the A7xi Ascent and is the answer not in the manual?
Questions and answers