LifeSpan C2 Owner's Manual page 22

Pedal Strap Adjustments
The straps should be tight enough to keep the ball of your foot on the pedals throughout the com-
plete pedal rotation.
Before working out, test each strap and adjust if required.
Each strap comes with a spring loaded clip on the outside of the pedals that keeps the straps in
place. To tighten the strap simply pull down on the loose end of the strap until the strap is properly
tensioned. To loosen the strap, press down on the top of the clip and pull the strap up. Release
the clip and lock the strap in place.
Resistance Adjustment
Resistance
Adjustment
Belt Tension Adjustment
If during normal operations you feel the belt slipping, you can adjust the tension by tightening the
tension adjustment nut located on the bottom of the exercise bike between the pedals and the front
base. Tighten the nut only until the belt stops slipping. Over tightening can cause damage to the
drive system.
19