Table of Contents
Advertisement
5.3 Connecting with the configuration tool (to change the IP address or upgrade the device
software.
To find devices connected to the network, click the "Refresh" button. The tool will search for devices connected to the network
and display them in the form of the list.
1
N
Number.
1
Device IP address.
2
Device TCP port.
3
Device subnet mask.
4
Device default gateway.
5
Device MAC address.
6
Select "IPv4" or "IPv6" or "All".
7
8
"Upgrade" button opens the interface to upgrade the device firmware See below (8).
9
Refresh the list.
"Login" button opens the login interface to confirm login, password and port and
10
configure the device. See below (10).
Disconnect.
11
2
3
7
4
9
8
Description
16
5
6
10
11
Advertisement
Table of Contents
