Advertisement
Step 1: Handlebar Support Post Assembly
A. Remove the screw (A) and nut (E) that are pre-assembled on the frame from each side of the
base using the 6 mm Allen wrench and 17 mm open end wrench provided in your tool kit.
These two screws will prevent the handlebars from rotating up into their upright position.
B. Stand the support posts and handlebars up into their operating position and re-attach the
screw (A) and nut (E) removed in step 1. Tighten securely.
C. Attach the left (13) and right (14) base covers using Phillips screwdriver and 2 machine screws
on each side. The 4 base cover attaching screws are located in the hardware bag.
TR800 / TR1200i
E
A
G
13
Folding Treadmill
Advertisement
