Ipp Port Printing Using Tcp/Ip In Windows 2000 - Panasonic KX-P7105 Operating Instructions Manual

Settings and Printing

IPP Port Printing Using TCP/IP in Windows 2000

The following the outline of the steps how to print using the TCP/IP protocol in Windows 2000.
NOTE
• If the firewall, etc. intercepts the communication between the printer and your computer, it
will be unable to use this printing method.
Step 1: Setting up TCP/IP on the computer
Step 2: Setting up TCP/IP for the printer
Step 3: Setting up the printer driver and the printer port on the computer
Step 1: Setting up TCP/IP on the computer
Make sure that the TCP/IP protocol is installed. Refer to
computer" on page 8
Windows Me".
Step 2: Setting up TCP/IP for the printer
Refer to "Step 2: Setting up TCP/IP for the printer" on page 9
IP in Windows 95 / Windows 98 / Windows Me".
Step 3: Setting up the printer driver and the printer port on the
computer
1
Click Start
2
Double click the Add Printer icon.
3
Add Printer Wizard window is displayed.
4
Click Next>
Maintenance and Spec.
in "LPR Port printing using TCP/IP in Windows 95 / Windows 98 /
, select Settings and then click Printers.
.
Network
Network
Setup in Windows
"Step 1: Setting up TCP/IP on the
in "LPR Port printing using TCP/
70