Panasonic KX-P7105 Operating Instructions Manual page 311

Settings and Printing
NetBEUI
name
Use NetBEUI Protocol
Computer Name
Workgroup
Comment
SNMP
name
Authentic Community
Use Authentic Trap
TRAP Community
TRAP Address
SysContact
SysName
SysLocation
Maintenance and Spec.
Factory Default
ENABLE
KXPxxxxxx
KXP-Printer
Panasonic
KX-P7110
Factory Default
******
DISABLE
public
0.0.0.0
NULL
NULL
NULL
Network
Network
Description
Enables or disables NetBEUI protocol.
Sets Computer name. This name is
shown as the computer in Windows
Explorer.
Sets the workgroup to which KX-P7110
belongs.
This comment is shown as the computer
in Windows Explorer.
Description
Sets SNMP authentic community name.
This community name is authenticated
when receiving SNMP Set Request.
Enables or disables authentic trap.
Enters TRAP community name. This
name will be used when the printer
executes a trap.
Enters the TRAP address. The TRAP
address is disabled if the IP address is set
0.0.0.0.
Enters SysContact for MB-II object.
Normally enter the administrator™s mail
address.
Enters SysName for MB-II object.
Normally enter the host name or domain
name.
Enters SysLocation for MB-II object.
Normally enter where the printer is
located.
126
Appendix