Setting The Printer Driver - Panasonic KX-P7105 Operating Instructions Manual

Settings and Printing

Setting the Printer Driver

If you install the RAM board, set the printer driver for the printer's installed memory (see
"Setting the Device Options"
If you install the Upgrade Kit (for PostScript), install the printer driver for PostScript and set it.
To install the printer driver for PostScript in Windows or Macintosh, refer to the Setup Guide.
To set the printer driver in Windows, see
on page 9. To set the printer driver in Macintosh, see "Macintosh" of "Settings and Printing" in
the Operating Instructions.
Setting the Device Options
• Printer driver for PCL:
(1) Click the Device tab (Windows 95
Settings tab (Windows NT® 4.0
(2) Change the installed memory of the printer.
• Printer driver for PostScript in Windows:
Refer to the help menu in Windows.
• Printer driver for PostScript in Macintosh:
See "see "Setting the Installable Options" on page 116
Printing".
1
*
Microsoft® Windows® 95 operating system (hereafter Windows 95)
2
*
Microsoft® Windows® 98 operating system (hereafter Windows 98)
3
*
Microsoft® Windows® Millennium Edition operating system (hereafter Windows Me)
4
*
Microsoft® Windows NT® operating system Version 4.0 (hereafter Windows NT 4.0)
5
*
Microsoft® Windows® 2000 operating system (hereafter Windows 2000)
Maintenance and Spec.
Maintenance and Spec.
below).
"Setting the Printer Driver for PostScript in Windows"
4
*
Network
1 2
* *
/Windows 98 /Windows Me
5
*
or Windows 2000 ).
in "Macintosh" of "Settings and
8
Upgrade Options
3
*
) or Device