Settings and Printing
Trouble
The print out media is
wrinkled.
The back of the printed
page appears dirty.
Maintenance and Spec.
Maintenance and Spec.
Possible Cause
The media is not installed
correctly.
The media is moist.
Incorrect type of media is used.
The transfer roller or fuser unit is
contaminated after clearing a jam.
The toner cartridge has reached
the end of useful life.
Incorrect type of media is used.
Network
Troubleshooting
Corrective Action
Install media correctly in the
media tray.
Adjust media guides correctly.
Use fresh paper.
Check the media usable or not
see "About Media" on page 9
(
in "Settings and Printing"),
see "Media" on page 51
(
Display the Remote Control Panel
and select Fuser Cleaning from
the Tool menu to print a cleaning
see "Remote Control
data (
Panel" on page 23
in "Settings
and Printing").
Replace the toner cartridge.
see "About
Use a correct media (
Media" on page 9
in "Settings
and Printing"),
see "Media" on page 51
(
33
).
).