Panasonic KX-P7105 Operating Instructions Manual page 287

Settings and Printing
6
Configure the print server
(1) Select the print server name you added from the Print Servers list, then press the
Enter key.
The Print Server Information menu is displayed.
(2) Select Print Server Configuration, then press the Enter key.
The Print Server Configuration Menu is displayed.
(3) Select Printer Configuration, then press the Enter key.
The Configured Printers list is displayed. Since this is a new Print Server entry, all
printers are labeled "Not Installed".
(4) Press the Enter key.
The Printer 0 Configuration screen is displayed with a title of "Printer 0".
(5) Press Esc key to save the change.
(6) At the prompt, select Yes to save the changes, then press the Enter key.
(7) Press the Esc key to return to the Print Server Configuration menu.
7
Assign a print queue to the printer.
(1) Select Queues Serviced By Printer and press the Enter key.
The Defined Printers list is displayed.
(2) Select the printer name you added from the list, then press the Enter key.
The File Server/Queue/Priority list is displayed.
(3) Press the Insert key.
The Available Queues list is displayed.
(4) Select the queue entered at step "2. Add the print queue", assign a priority level 1 to
10, and then press the Enter key.
(5) When you finish assigning the queues, press the Esc key. Continue to press the Esc
key to return to the Available Options menu.
(6) Turn the printer off and on again.
Maintenance and Spec. Network
Network
Setup in NetWare
102