Parts
Loading Media and Printing
See the setup guide(s) for the following instructions.
• Installing the toner cartridge and drum unit
• Connecting cables
• Installing the printer software
The media is printed out to the output tray (top of the printer). When using thick paper [106 -
2
165 g/m
(29-44 lbs.)] or when an envelope is printed, it may be curled. You can avoid this by
opening the rear cover and the media is printed straight out. However, it needs to be removed
after the media is printed out to avoid a media jam. For available media,
page
9.
Manual feed
Media tray
NOTE
• Be sure to use manual feed when printing a document on a thick paper [106 -165 g/m
(29-44 lbs.)] or label.
• Plain paper (A4, Letter, Legal, B5, Executive) can be loaded in the optional 2nd feeder.
Windows
Windows
A
Macintosh
A
: Normal pass (face down)
: Straight pass (face up)
B
B
Rear cover
2nd feeder
(option)
Loading Media and Printing
see "About Media" on
11
2