Settings and Printing
2
Add print queue with smit command
(1) Perform smit. Move to "Add print queues".
# smit mkrque
(2) From the list, select "remote" (printer connected to remote host).
(3) From the list, select "Standard processing from the list".
(4) Set up the following item at "Add a Standard Remote Print Queue".
For items other than the ones below, change according to your system.
Example: Add print queue "kxp7110lp".
Name of QUEUE to add
Hostname of remote server
Name of Queue on remote server
TYPE of print server
DESCRIPTION of printer on remote srver
The "lp" on "Name of QUEUE to add" is the queue printer name.
3
Print
•Print using "lp" command.
# lp -d kxp7110lp <file name>
Maintenance and Spec.
Network
Network
[kxp7110lp]
[kxp7110]
[lp]
[BSD]
[comments]
111
Setup in UNIX