Panasonic KX-P7105 Operating Instructions Manual page 292

Settings and Printing
1
Login as root.
2
Edit your /etc/hosts file to add the printer as a network printer to your
system.
(Example)
The printer's IP address is "172.16.xxx.xxx" and the host name is "kxp7110".
172.16.xxx.xxx
3
Confirm the connection to the network by using ping command.
Step 3: Setting up print queues
You need to set up a print queue to use the network printer depending on your system.
For Solaris 2.6
1
Create Printer Queue.
(1) Login as root.
# login root
(2) Add print server name
Example: adding printer queue name as "kxp7110lp"
# lpadmin -p kxp7110lp -m netstandard -o protocol=bsd
-o dest=kxp7110:lp -v /dev/null
The "lp" after ":" is the remote printer queue name.
(3) Enable printer queue:
# usr/sbin/accept kxp7110lp
# usr/bin/enable kxp7110lp
2
Print
Print using "lp" command. For details, refer to the Solaris manual.
# lp –d kxp7110lp <file name>
Maintenance and Spec.
# login root
kxp7110
# ping kxp7110
Network
Network
#print server
107
Setup in UNIX