Table of Contents
Advertisement
2.1.4 Drive Bay Installation
The drive bay of IACP-4000 can hold 5.25" (x3) and 3.5" (x1) devices.
Installation of disk drives:
1.
Remove the top cover
2.
Undo the two screws of cushion and four screws on the drive bay
3.
Lift off the Standard Drive Bay.
4.
Insert the drives into their proper locations in the drive bay and
secure them with the screws provided.
5.
Connect the disk drive power and signal cables.
2.1.5 Motherboard Installation & Information
For the more detailed information of the IACP-4000 Series motherboard,
please refer to the below path in the user CD : \2063615201_V3.1\System
Drivers\IACP-4000\Motherboard Driver\i915GV-INA Motherboard
MANUAL
11
Chapter 2
Advertisement
Table of Contents
