Table of Contents
Advertisement
Installation
Hardware Installation
WARNING: Do not mount the camera on a soft material. The camera may fall and be
damaged.
1. Use the enclosed Allen key to detach the dome cover from the camera device.
2. Remove the dry bag from its package. Use the double-sided tape to stick the dry bag
onto the designate position inside of the dome cover.
3. Choose the location on the wall or ceiling to place the camera. Attach the location sticker
to the desired spot. For ceiling installation, the best place to mount the camera is into a
ceiling stud.
4. Drill three holes through the center of the three location holes on the sticker.
- 7 -
Advertisement
Table of Contents
Need help?
Do you have a question about the MD-100A series and is the answer not in the manual?
Questions and answers