Table of Contents
Advertisement
Hardware Installation
WARNING: Do not mount the camera on a soft material. The camera
may fall and be damaged.
Step 1. Camera Installation
A.
Use the enclosed Allen key to detach the dome cover from the
camera device.
B.
Hammer the three plastic anchors which are provided in the product
package into the three location holes. The user needs the three
screws which are included in the product package and a screwdriver.
Mount the camera on the wall or ceiling and position the three screw
slots over the plastic anchors. Insert the screws into the holes and
use the screwdriver to tighten the screws clockwise until they are
secure.
Advertisement
Table of Contents
Need help?
Do you have a question about the VD-E200Af and is the answer not in the manual?
Questions and answers