Brickcom MD-100A series User Manual page 12

Megapixel mini dome network camera

Hide thumbs Also See for MD-100A series:

Table of Contents

5. Hammer the three plastic anchors which are provided in the product package into the

three location holes.

6. The user needs the three screws which are included in the product package and a

screwdriver. Mount the camera on the wall or ceiling and position the three screw slots

over the plastic anchors. Insert the screws into the holes and use the screwdriver to

tighten the screws clockwise until they are secure.

NOTE: For assembling the waterproof connector, please refer to the

instructions included in the connector package.

- 8 -

Table of Contents

Need help?

Do you have a question about the MD-100A series and is the answer not in the manual?