Table of Contents
Advertisement
6. If the camera supports the EasyLink
displayed. Otherwise, this page will not be shown. *If desired, click <Skip> to
skip this setting.
TM
EasyLink
is a unique Brickcom function which allows users to assign a unique EasyLink
name to their network camera's IP address. There is no need to configure the router to open
up ports or remember hard-to-memorize IP addresses.
[uniqueEasyLinkname].mybrickcom.com to view the camera's web GUI and live view.
Enter a unique EasyLink name whose length must be between 5-32 characters.
When finished, click the arrow button to continue.
TM
function, the following page will be
- 27 -
Users can log onto
Advertisement
Table of Contents
Need help?
Do you have a question about the MD-100A series and is the answer not in the manual?
Questions and answers