Table of Contents
Advertisement
Chapter 4 - Installation
4.1 Hardware Installation
Do not mount the camera on any soft material. The camera may fall and be
damaged.
A compliant waterproof connector shall be attached tightly to the conduit hole
of the Vandal Dome Network Camera, and all the cables shall run through the
connector for the camera to be IP66-compliant.
This document is for the easy installation purpose only; please refer to the
user manual for more details.
A. Wall Installation
(1) Drill three holes into the wall. (2) Hammer the supplied plastic anchors into the three
holes. (3) Use a screwdriver and the supplied screws to secure the camera to the wall.
6
Advertisement
Table of Contents
Need help?
Do you have a question about the OB-E400Af and is the answer not in the manual?