Table of Contents
Advertisement
MIDI Program
The MIDI Program parameter determines the MIDI Program change message that the
currently selected Zone sends when the Multi is loaded. You can set this parameter to a
MIDI Program change message from 0 to 127.
When using the Artis as a MIDI controller, sending a MIDI Program change message
(along with a MIDI bank change message) when a Multi is loaded ensures that the Program
loaded on the other sound modules in your MIDI chain is the Program that you want. For
example, if you've configured a Multi to work in a specific way with Program 32 in Bank 5
of a connected sound module, then set MIDI Bank to 5 and MIDI Program to 32. This
way, whenever you load this Multi, the sound module will automatically load Program 32 in
Bank 5.
Pressing both Previous & Next buttons simultaneously will set this parameter to the
Program number of the currently selected Local Program.
Differing Program Numbers
If the Programs on your connected sound module are organized by MIDI Bank with each
Program number being between 0 and 127, then use the following formula to determine
what number to enter for the MIDI Program Change Function:
So for example, if you want to send a MIDI Program Change message for Program 83 in
MIDI Bank 4, you would enter the number 595—this number is equal to 4 * 128 + 83.
If the Programs on your connected sound module are organized by MIDI Bank with each
Program number being between 1 and 128, then use the following formula to determine
what number to enter in MIDI Program Change Mode:
So for example, if you want to send a MIDI Program Change message for Program 83 in
MIDI Bank 4, you would enter the number 594—this number is equal to 4 * 128 + (83 - 1).
NOTE : When you change the Program parameter, the MIDI Bank
and MIDI Program parameters will automatically change to match the
Bank and Program numbers of the Program that you select for Local
Program. For example, if you choose Program 178, then MIDI Bank
will change to 1 and MIDI Program will change to 49.
[MIDI Bank number] * 128 + [Program number]
[MIDI Bank number] * 128 + [Program number] -1
Multi Edit Mode
Zone Parameters
8-13
Advertisement
Table of Contents
