Table of Contents
Advertisement
LOAD Page
The LOAD button allows you to load a file containing previously saved User Programs and
User Multis from a computer or storage device connected to the Artis via USB.
Before you press the LOAD selection button in Global Mode, make sure you have plugged
the USB device containing your User Programs and/or Multis into the back of the Artis.
If your User Programs/Multis are located on your computer or Tablet, then use the cable
that plugs into the computer/Tablet USB port on the rear panel of Artis.
If your User Programs/Multis are located on a USB flash drive, plug them into the Device
USB port on the rear panel of Artis.
It is important for you to be aware of what USB port you have plugged into on Artis, as it
will ask you from which USB port to load sounds from.
Pressing LOAD
Press the LOAD button when you have the hardware containing your User Programs/Multis
plugged into the USB port.
NOTE : If Artis is currently connected to your computer as a MIDI
controller, eject or Safely Remove it before continuing. Selecting the
Load page will disconnect any MIDI device connected via USB.
Global Mode
LOAD Page
9-13
Advertisement
Table of Contents
