Table of Contents
Advertisement
Multi Mode
The Layer Function
Initially the last used Layer Program will be selected, or the default Layer Program (192 Add
a Pad 2) if this is the first time using the Layer Function since power-up. Choose a Layer
Program using the Category and Program/Multi buttons, the Alpha Wheel, or the Previous/
Next buttons.)
Vol (Layer Volume)
Press the VOLUME soft button to change the Vol (Layer Volume) parameter. This
parameter determines the volumes of the Layer Program and the previously active Zone(s).
By default, the Layer Volume is set to 0, which results in all Zones having the same volume.
When set to a positive number, the volume for the previously active Zone(s) is decreased.
When set to a negative number, the volume for the Layer Program is decreased. To set the
Layer Volume, use the Alpha Wheel, Previous/Next buttons, or enter a number using the
numbers printed on the Program/Multi buttons followed by pressing the Enter button.
Layer Volume can be set to any number between -127 and 127.
Pressing the Value Jump button pair (Previous & Next) resets the volume to 0.
Transpose (Layer Transposition)
Press the XPOSE soft button to change the Transpose (Layer Transposition) parameter.
This parameter allows you to transpose the Layer Program in octaves so that it sounds
octaves higher or lower than the other Zone(s) you are layering on top of. Use the Alpha
Wheel or Previous/Next buttons to set the Transpose value. Transpose can be set to -24,
-12, 0, 12, and 24. By default, Layer Transposition is set to 0.
Saving a Layer
After setting the Layer parameters, press the Save button to the left of the display to begin
the saving process. See Save & Delete User Multis on page 7-12 for details on saving.
Once you have saved your Layer, you can continue to add Split or Layer Zones to the Multi
until you reach the maximum of four active Zones. Also, once you have saved your Layer,
you can edit controller assignments and other Multi parameters in Multi Edit Mode (see
Multi Edit Mode on page 8-1 for details).
7-11
Advertisement
Table of Contents
