Table of Contents
Advertisement
Multi Edit Mode
Zone Parameters
2. MIDI
When Destination is set to MIDI, MIDI data from the Zone is sent only to the MIDI Out
and USB ports. MIDI data is not sent to an Artis Program on this Zone.
3. Local + MIDI
When Destination is set to Local + MIDI, MIDI data from the Zone is sent to an Artis
Program and to the MIDI Out and USB ports.
Select the desired destination depending on your needs for that zone.. If you want to play
the Artis, but not send any MIDI information to other MIDI instruments, then select Local.
If you want to use the Artis strictly as a MIDI controller for the other modules in your
MIDI chain, then select MIDI. If you want to make use of the Artis's sounds as well as use
it as a MIDI controller, then select Local+MIDI.
8-8
NOTE : MIDI Out applies to the 5-pin MIDI Out and USB ports.
Advertisement
Table of Contents
