Table of Contents
Advertisement
MIDI Channel
The MIDI Channel parameter determines the MIDI transmit and receive channel for the
currently selected Zone. You can set this parameter to any of the 16 MIDI channels (1-16).
Pressing Previous & Next buttons simultaneously will set this parameter to 1.
You can assign different Zones to the same channel, but only one Program can be loaded in
a channel at a particular time.
Destination
The Destination parameter determines whether MIDI data generated by the keyboard and
physical controllers of the currently selected Zone is sent to an Artis Program, through
the MIDI Out/USB ports, or all three. You can set this parameter to any of the three
destinations for this parameter:
Note that this parameter works in conjunction with the Global parameter of the same name
(see page 9-8) and both are active. They act like filters, so if one is set to MIDI, and the
other is set to Local + MIDI, transmission will be limited to MIDI only.
CAUTION: It is possible to stop all MIDI transmission, in Multi Mode,
if one Destination parameter is set to Local, and the other is set to
MIDI.
1. Local
When Destination is set to Local, MIDI data from the Zone is sent only to the Artis
Program. MIDI data from this Zone is not sent to the MIDI Out and USB ports.
Multi Edit Mode
Zone Parameters
8-7
Advertisement
Table of Contents
