Table of Contents
Advertisement
Chapter 4
Terminology
This chapter provides definitions and descriptions for all of the Artis-specific terms used in
this manual. Some of the terms are also used by other manufacturers.
Since there are no standard definitions for some of these terms, they are described here to
avoid confusion. All of these terms appear with the first letter capitalized as proper nouns
in this manual to make it easy to distinguish between the generic term and the Artis specific
term.
In addition to the terms below, and to avoid confusion, any Artis specific feature, connector
or control will have the first letter capitalized to distinguish it from the generic term.
A Program is an instrument sound that plays on a MIDI
Program
channel. The sound of each Program can be modified
by parameters that are assigned to the controllers (Sliders,
Switch buttons, Mod Wheel, and Pedals).
See Program Mode on page 6-1 for more information on
Programs.
A Multi allows up to 4 instrument sounds (Programs) to be
Multi
played from the keyboard at once. A Multi has 4 Zones,
each with its own keyboard range, Program, MIDI channel,
and controller assignments.
See Multi Mode on page 7-1 for more information on
Multis.
Terminology
4-1
Advertisement
Table of Contents
