Entry Value; Exit Value - Kurzweil Artis User Manual

Multi Edit Mode
COMMON Page
Controller
Number

Entry Value

The Entry Value parameter determines the value of the continuous controller that is sent as
a MIDI message when the current Multi is loaded. You can set this parameter to any number
between 0 and 127, or to None.
Pressing both Previous & Next buttons simultaneously will set this parameter to None.
If Entry Value is set to None, when you load the current Multi, no value will be sent. If you
specify an Entry Value, then a MIDI controller message with this value will be sent when
you load the current Multi.

Exit Value

The Exit Value parameter determines the value of the continuous controller that is sent as a
MIDI message when the current Multi is exited. You can set this parameter to any number
between 0 and 127, or to None.
Pressing both Previous & Next buttons simultaneously will set this parameter to None.
If Exit Value is set to None, then when you leave the current Multi, the controller will
remain at whatever value corresponds to its current position. If you specify an Exit Value,
then a MIDI controller message with this value will be sent when you close the current
Multi.
8-22
Controller
Destination
134 KeyNum
135 KeyVel
136 ProgInc
137 ProgDec
138 ProgGoto
139 MultiInc
140 MultiDec
141 SetpGoto
145 TransUp
146 TransDown
Triggers playback of notes by Key Number—e.g., C4 is 60. Send a velocity
first with Destination135, KeyVel.
Key Velocity
Program Increment—increments current Program number.
Program Decrement—decrements current Program number.
Go to Program—selects Program.
Multi Increment—increments current Multi number.
Multi Decrement—increments current Multi number.
Go to Multi—selects Multi.
Transpose Up (ST)
Transpose Down (ST)
Description