Table of Contents
Advertisement
Global Mode
MIDI Page
MIDI Page
The Artis can transmit and receive MIDI via its MIDI ports and USB. The MIDI page in
Global Mode allows you to configure how this will be handled.
Destination
The Destination parameter determines the destination of MIDI data generated by striking
keys or activating controllers. This data can be sent to the Artis sound engine, through the
MIDI out ports, or both. You can set this parameter to any of the three destinations for this
parameter:
Note that this parameter is always active and works in conjunction with the Multi Mode
Destination parameter (see page 8-7). These parameters act like filters, so if the Multi
Mode Destination parameter is set to Local + MIDI and the Global Mode parameter is set
to Local, the MIDI data will only be transmitted locally.
9-8
Parameter
Destination (Destination)
Bank Select (BankSelect)
Program Change (Pro-
gramChange)
Channel Enable (Chan1–
16)
Local Keyboard Channel
(LclKbdChan)
SysEx ID
Range of Values
Local, MIDI, Local+MIDI
0, 32, 0/32
On, Off
Enable, Disable
(For each Channel)
None, 1 to 16
0 to 127
Default Value
Local+MIDI
0/32
On
Enable
(On all Channels)
None
0
Advertisement
Table of Contents
