Table of Contents
Advertisement
2.
In most cars, fasten the (+) probe of your meter to (+)12V constant.
3.
Probe the wire you suspect of being the door trigger wire. If the meter reads
(+)12V when any door is opened and the meter goes to 0 with the door closed,
you have found a trigger wire.
N N O O T T E E : Make sure the wire you use "sees" all the doors! Some newer vehicles lack
standard-type pinswitches. The dome light in these vehicles is turned on when the door
handle is lifted. These usually have a wire coming out of the door into the kick panel
which will provide a (-) trigger for all doors.
main harness wire connection guide
main harness wiring diagram
___
ORANGE
H1/1
___
WHITE
H1/2
___
WHITE/BLUE
H1/3
___
BLACK/WHITE
H1/4
___
GREEN
H1/5
___
BLUE
H1/6
___
VIOLET
H1/7
___
BLACK
H1/8
___
YELLOW
H1/9
___
BROWN
H1/10
___
RED
H1/11
___
RED/WHITE (-) 200mA Auxiliary Channel/Delayed Accessory Output
H1/12
10
(-) 500mA Ground When Armed
(+)/(-) Light Flash Output
(-) 200mA Domelight Supervision Output
(-) Door Trigger Input
(-) Instant Trigger (Hood and Trunk Pin)
(+) Door Trigger Input
(-) Chassis Ground Input
(+) 12V Constant Power Input
© 2005 directed electronics, inc.
No Function
(+) Ignition Input
(+) Siren Output
Hide quick links:
Advertisement
Table of Contents
