Menu #1 - Viper 330V Installation Manual

Car security
Hide thumbs Also See for 330V:
Table of Contents

Advertisement

menu #1

1-1 ACTIVE/PASSIVE ARMING: These settings control the systems mode of arming.
• Active arming mode (default): the system will only arm when the transmitter is
used.
• Passive arming mode: the system will arm automatically 30 seconds after the
last door is closed or can be armed anytime using the transmitter.
1-2 CHIRPS ON/OFF: This setting controls the systems arming & disarming chirps.
• Chirps ON (default): the system will emit chirps when arming and disarming.
• Chirps OFF: the system will NOT emit chirps when arming and disarming.
1-3 DOOR TRIGGER ERROR CHIRP ON/OFF: These settings control the warning
chirp that is generated if the system is armed with the door trigger input active,
either due to an open door or factory delayed dome light circuit.
• Error chirp ON (default): The siren will emit a single chirp and bypass the
active input when arming the system.
• Error chirp OFF: The siren will NOT emit a chirp due to an active input when
arming and will bypass the active input. This setting is helpful for vehicles with
factory delayed dome lights.
A few seconds after the input stops (delay dome light off, door closed) the system
will again monitor the door trigger input.
1-4 IGNITION-CONTROLLED DOMELIGHT ON/OFF: These settings control whether
or not the dome light illuminates when turning the ignition off.
• IGN dome light ON (default): The dome light will illuminate for 30 seconds
each time the ignition is turned off
• IGN dome light OFF: The dome light will only turn on when disarming the
system and turn off when the ignition is turned on.
1-5 PANIC/AUXILIARY OUTPUT ENABLED: These settings change the systems abili-
ty to activate panic mode or the Channel 2 output.
• Panic mode enabled (Default): in this setting if the system sees the vehicle doors
lock 2 times rapidly the Panic mode will be activated for the programmed siren
duration.
• Auxiliary channel output: in this setting the auxiliary channel output described
in Feature #6 will be activate as programmed.
34
© 2005 directed electronics, inc.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents