Menu #2 - Viper 330V Installation Manual

1-11 HORN PULSE HONK DURATION: These settings adjust the pulse length of the
optional horn honk output and allow for connection to more and less efficient
vehicle horns without annoyingly loud arm/disarm honks.
• 20mS (default): for more efficient vehicle horns
• 30/40/50mS: for less efficient vehicle horns

menu #2

2-1 IGNITION-CONTROLLED LOCKING ON/OFF: This settings control whether the
doors lock automatically after ignition is turned on.
• Lock ON (default): in this setting the doors will lock automatically 3 seconds
after the ignition is turned on.
N N O O T T E E : : This output is bypassed if a door is opened at the time the ignition is turned
on.
• Lock Off: The doors will not lock automatically when the ignition is turned on.
2-2 IGNITION-CONTROLLED UNLOCKING ON/OFF: This settings control whether
the doors unlock automatically when ignition is turned off.
• Unlock ON (default): in this setting the doors will unlock automatically when
the ignition is turned off.
• Unlock OFF: The doors will not unlock automatically when the ignition is turned
off.
2-3 ACTIVE/PASSIVE LOCKING: These settings control whether the doors lock when
the system arms passively. Passive arming must be programmed on for this fea-
ture to work.
• Passive locking OFF (default): in this setting the doors will not lock when the
system arms passively. They will only lock when the transmitter is used to arm the
system.
• Passive locking ON: in this setting the doors WILL lock when the system arms
passively. The doors can also be locked when using the transmitter to arm the
system.
N N O O T T E E : : Remember, when passive arming is selected, the unit will chirp 20 seconds
after the last door is closed. The system does not actually arm or lock the doors until
30 seconds after the door has been closed.
36
© 2005 directed electronics, inc.