Martin MiniMAC Wash User Manual page 9

3 Align the bracket with the keyholes in the base. Insert both locking pins into the
holes and turn both levers a full 1/4 turn clockwise to lock. The fasteners are
locked only when turned fully clockwise.
4 Screw the eye bolt securely into the base as shown below.
5 Block access below the work area.
6 Working from a stable platform, clamp the fixture to the structure.
7 Fasten a safety cable that can bear at least 10 times the weight of the fixture to
the structure and the eye bolt.
Installation 9